We offer an extensive spectrum of solvent and water-based printing inks meeting packaging industry
requirements. Our product basket not only contains conventional inks but also have eco-friendly
solutions for wide variety of substrates – plastic films, foil and paper, printing application – reverse or
surface printing and processes – be it Gravure or Flexo.
Our printing inks perform smoothly on various printing speeds, shows excellent color reproduction, low
odour, low solvent retention – providing a true value addition to packaging.
Our ink technology is well designed to cater various packaging – Retort packaging, Deep freeze
application, high bond strength requirements, shrink applications, high heat resistance, high gloss and so
on.
Our printing inks have been carefully designed by using selective raw materials to comply the
requirements and guidelines of national and international standards.
We have specialty coatings to enhance aesthetic appeal and performance of packaging – Matt overprint
varnishes, High gloss overprint varnishes, Anticurl coating for paper, foil primer, Heat Seal Lacquer…….
We are equipped to provide tailor-made solutions - Our dedicated technical services team is always
ready to understand your requirements and provide most viable solutions aligned with required
specifications.
EXPLORE OUR GAMUT OF PRINTING INKS & COATINGS !!!
For further technical information, you may reach out to us
at support@inkofix.com
VINPACK INK
High end Vinyl modified ink series for reverse printing & lamination jobs
Solvent System
Reducer : Ethyl Acetate / Toluene
Retarder : MIBK
Special features:
Excellent printability at high & low printing speed
Good bond strengths on various laminate structures
Suitable for plain, corona treated and coated PET film
Can be used for BOPP reverse printing with additive
Low solvent retention and low odour level
Better colour strength as compared general market products
Cost effective solution
Good press stability
TECHNICAL DATA SHEET
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
AURALAM TB INK
High strength PU based ink system for reverse printing & lamination jobs
Solvent System
Reducer : Ethyl Acetate / Toluene / IPA
Retarder : MIBK or Methoxy propanol
Special features:
Excellent printability at high speeds
Good bond strengths on various laminate structures
Common ink for PET & BOPP
Low solvent retention and low odour level
Better colour strength as compared general market products
Good press stability
TECHNICAL DATA SHEET
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
GRAVURE EXP LAM INK
Gravure EXP LAM inks are gravure reverse printing ink system, suitable for PP Extrusion Lamination with HDPE or PP woven fabric.
Solvent System – Toluene / Ethyl acetate = 50 / 50
Special features:
Excellent printability at high speeds
Good bond strengths on Extrusion lamination
Low solvent retention and low odour level
Good heat resistance
Suitable for BOPP reverse printing
Excellent adhesion on BOPP
Good press stability
TECHNICAL DATA SHEET
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
AURALAM NTNK INK
High strength Non Toluene – Non Ketone, PU based ink system for reverse printing & lamination jobs
Solvent System
Reducer : Ethyl Acetate / n-PAC / IPA
Retarder : Butyl acetate or Methoxy propanol
Special features:
Excellent printability at high speeds
Non-toluene and Non- Ketone ink system
Good bond strengths on various laminate structures
Common ink for PET & BOPP
Low solvent retention and low odour level
Conforms to international norms to food packaging
CONEG regulations, Nestle food packaging guidelines, EUPIA
guidelines, Japan NL Regulations & IS 15495 : 2020
TECHNICAL DATA SHEET
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
AURALAM RT INK
High End PU based ink system for reverse printing & lamination jobs
Specially designed for Retort Packaging
Solvent System
Reducer : Ethyl Acetate / n-PAC / IPA
Retarder : Butyl acetate or Methoxy propanol
Special features:
Excellent printability at high speeds
Non-toluene and Non- Ketone ink system
Excellent bond strengths on Retort laminate structures
High Light Fast and High heat resistance
Low solvent retention and low odour level
Suitable for high retort condition – 130 deg C / 30min
Conforms to international norms for food packaging :
CONEG regulations, Nestle food packaging guidelines, EUPIA guidelines, Japan NL Regulations & IS 15495 : 2020
TECHNICAL DATA SHEET
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
GRAVURE HG INK
Solvent based surface printing high gloss inks suitable for general purpose printing and twist wrap applications
Solvent System – Toluene/ IPA = 80/ 20
Special features:
Excellent printability with good gloss
Suitable for Polyethylene, BOPP, Met. Films, CPP etc.
Good scratch & nail resistance
Suitable for general purpose surface printing
Not recommended for Deep freeze applications
Special effect inks are available on demand
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
GRAVURE WAL INK
Solvent based surface printing inks specially designed to print Wrap Around Labels
Solvent System – Ethyl Acetate / Toluene/ IPA = 60/ 30/ 10
Special features:
Excellent printability at high & slow speeds
Suitable for BOPP, Pearlised OPP, Met. Films, CPP etc.
Good scratch resistance & Deep freeze properties
Suitable for wrap around labels
Recommended with Gravure HR -Over print varnish to get good Deep freeze properties and Heat resistance
Excellent gloss and printability
Special effect inks are available on demand
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
GRAVURE HR-PAP INK
Solvent based surface printing inks specially designed to print on Paper substrate for food packaging applications
Solvent System – Ethyl Acetate / IPA = 80/20
Special features:
Excellent printability at high speeds
Low viscosity and high strength inks
Good blocking resistance, suitable for paper – foil laminates etc
Good heat & scratch resistance properties
Suitable for food and non-food applications
Suitable for combination with UV varnish. Excellent over printability and gloss
Conforms to international norms for food packaging :
CONEG regulations, Nestle food packaging guidelines, EUPIA guidelines, Japan NL Regulations & IS 15495 : 2020
TECHNICAL DATA SHEET
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
GRAVURE HT- FOIL INK
Solvent based surface printing inks specially designed to print on Al foil and Paper suitable for Pharma packaging with High Heat Resistance
Solvent System – Ethyl Acetate / IPA = 80/20
Special features:
Excellent printability at high & slow speeds
Suitable for Hard and Soft aluminium foil
Good heat & scratch resistance properties
Suitable for food and non-food applications
Suitable for combination with over print varnish to get high heat resistance (220-230 degC / 2 kg/ 1 sec)
Conforms to international norms for food packaging :
CONEG regulations, Nestle food packaging guidelines, EUPIA guidelines, Japan NL Regulations & IS 15495 : 2020
TECHNICAL DATA SHEET
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
AURATIP INK
Solvent based ink system specially designed for printing on Cigarette Tips – tobacco applications
Solvent System – Ethyl Acetate
Special features:
Good printability and good lay properties on Tipping paper
Good heat resistance properties
Specially designed to meet international standards such as DTVO compliance
Various metallic and bright colours are available as per requirement
Recommended with over print varnish (Lip release varnish) specially in White tipping area
Excellent gloss and printability
Conforms to international norms for food packaging :
CONEG regulations, Nestle food packaging guidelines, EUPIA guidelines, Japan NL Regulations & IS 15495 : 2020
TECHNICAL DATA SHEET
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
Gemini Pack – 2K Matt OPV
Solvent based 2-component high heat resistance Matt OPV
Solvent System – Ethyl Acetate
Special features:
Excellent matt effect when printed on PET films
Good heat resistance properties (220-230 Deg C / 2 kg/ 1 sec)
Good scratch resistance properties after curing
25% Hardener to be added during printing to get proper curing and high heat resistance
2-3 days of curing is recommended after printing to get good heat and scratch resistance properties
Not suitable for boil / retort applications
Conforms to international norms for food packaging :
CONEG regulations, Nestle food packaging guidelines, EUPIA guidelines, Japan NL Regulations & IS 15495 : 2020
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
Gemini Star – Matt OPV
Solvent based Single component high heat resistance Matt OPV
Solvent System – Ethyl Acetate / IPA = 80/20
Substrate – PET and BOPP films
Special features:
Very good matt effect with good scratch resistance
Good heat resistance properties (160-170 Deg C / 2 kg/ 1 sec)
Good scratch resistance properties after curing
No hardener is required during printing
24 hrs of curing is recommended after printing to get good heat and scratch resistance properties
Not suitable for boil / retort applications
Conforms to international norms for food packaging :
CONEG regulations, Nestle food packaging guidelines, EUPIA guidelines, Japan NL Regulations & IS 15495 : 2020
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
GeminiFilm – Gloss OPV
Solvent based Single component High Gloss Over Print Varnish
Solvent System – Ethyl Acetate / IPA = 80/20
Substrate – Multilayer PE films
Special features:
Excellent gloss with good scratch resistance properties
Good heat resistance properties (190 – 200 Deg C / 2 kg/ 1 sec)
Good scratch resistance properties after curing
No hardener is required during printing
Not suitable for boil / retort applications
Conforms to international norms for food packaging :
CONEG regulations, Nestle food packaging guidelines, EUPIA guidelines, Japan NL Regulations & IS 15495 : 2020
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
Gravure HT-Foil Primer
Solvent based Primer for Alu foil, Metallized films and Metallized Paper
Solvent System – Ethyl Acetate
Special features:
Provides excellent adhesion on various substrates
Good heat resistance properties (200 – 210 deg C / 2 kg/ 1 sec)
Low GSM is required to give good properties (0.2-0.5 GSM)
Not suitable for boil / retort applications
Suitable for food packaging applications
TECHNICAL DATA SHEET
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
CORUS LAM INK
High strength Non Toluene – Non Ketone, NC- PU based CI Flexo ink system for reverse printing & lamination jobs
Solvent System
Reducer : n Propanol/ n Propyl acetate: 80/20
Retarder : Ethoxy propanol
Special features:
High Pigmentation inks
Excellent printability at high speeds
Non-toluene and Non- Ketone ink system
Good bond strengths on various laminate structures
Excellent Press stability
Low solvent retention and low odour level
Conforms to international norms to food packaging :
CONEG regulations, Nestle food packaging guidelines, EUPIA
guidelines, Japan NL Regulations & IS 15495 : 2020
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
CORUS PACK INK
High strength Polyurethane based CI Flexo ink system for reverse printing & lamination jobs
Nitrocellulose resin free ink system suitable for PET and BOPP printing
Solvent System
Reducer : n Propanol/ n Propyl acetate: 80/20
Retarder : Ethoxy propanol
Special features:
Excellent printability at high speeds
Non-toluene and Non- Ketone ink system
Good bond strengths on various laminate structures
Excellent Press stability
Low solvent retention and low odour level
Conforms to international norms to food packaging :
CONEG regulations, Nestle food packaging guidelines, EUPIA
guidelines, Japan NL Regulations & IS 15495 : 2020
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
CORUS FILM INK
High strength Non Toluene – Non Ketone CI Flexo ink system for surface printing jobs requiring Heat resistance/ deep freeze resistance/ Oil* and Milk Resistance (*OPV is recommended for oil packaging jobs)
Solvent System
Reducer : n Propanol/ n Propyl acetate: 80/20
Retarder : Ethoxy propanol
Special features:
Good gloss, nail & rub resistance
Suitable for deep freeze/ Milk/ Oil packaging jobs
Excellent printability at high speeds
Non-toluene and Non- Ketone ink system
Excellent Press stability
Low solvent retention and low odour level
Conforms to international norms to food packaging :
CONEG regulations, Nestle food packaging guidelines, EUPIA
guidelines, Japan NL Regulations & IS 15495 : 2020
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
CORUS STAR INK
High strength, high gloss CI Flexo ink system suitable for general purpose printing and twist wrap applications.
Solvent System – n Propanol/ n Propyl Acetate = 80/ 20
Special features:
Excellent printability with good gloss
Suitable for Polyethylene, BOPP, Met. Films, CPP etc.
Good scratch & nail resistance
Good heat resistance
Not recommended for Deep freeze applications
Special effect inks are available on demand
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
GEMINISTAR FLEXO OPV
High gloss over print varnish suitable for general purpose packaging jobs.
Substrate – Paper, Foil/Paper Laminate & Treated PE Film
Solvent System – n Propanol/ n Propyl Acetate = 80/ 20
Special features:
Suitable for CI Flexo printing process
Excellent Gloss
Good heat resistance properties
Good scuff resistance
Suitable for general purpose packaging jobs
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
GEMINIFILM FLEXO OPV
Heat resistant over print varnish suitable for packaging jobs requiring oil resistance property.
Substrate – Paper, Foil/Paper Laminate & Treated PE Film
Solvent System
Flexo: n Propanol/ n Propyl Acetate = 80/ 20
Gravure: IPA/ Ethyl Acetate = 80/ 20
Special features:
Suitable for CI Flexo printing process
Provides excellent oil and milk resistance when applied over Corusfilm Inks
Good heat resistance properties (180 oC / 2 kg/ 1 sec)
Suitable both for Gravure and Flexo printing process
Suitable for food packaging applications (non food contact side)
To achieve better results – it is recommended to apply minimum 0.8 gsm of OPV.
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
OCEAN PACK INK
Water based ink system for surface printing application – suitable for paper printing
Solvent System – DM Water / IPA = 90/ 10
Special features:
Good printability at high speed
Recommended to use ESA (electrostatic assist) system to get good printability in half tone areas
Good Scratch and Heat resistance properties
Recommended with over print varnish to get good heat resistance
Excellent gloss and printability
Conforms to international norms for food packaging :
CONEG regulations, Nestle food packaging guidelines, EUPIA guidelines, Japan NL Regulations & IS 15495 : 2020
TECHNICAL DATA SHEET
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
OCEANLAM INK
Water based inks suitable for Reverse printing and Lamination on Treated PET and Treated BOPP films through Gravure printing process
Solvent System – Water / IPA = 80/20
Special features:
Excellent printability at high speeds – tested upto 300 Mtr / min
Good bond strengths on various laminate structure
Good blocking resistance
Good heat resistance
Stable pH balance compared to conventional Acrylic based ink system
Minimum use of press side additive
Conforms to international norms for food packaging :
CONEG regulations, Nestle food packaging guidelines, EUPIA guidelines, Japan NL Regulations & IS 15495 : 2020
TECHNICAL DATA SHEET
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
GEMINICURE – GP1000 R
High Gloss UV curable coating for General Purpose application
Substrate – Coated / Un-coated Paper
Special features:
Provides Excellent gloss
Can be printed over solvent based, water based or UV curable inks
Good heat resistance properties (200 – 210 deg C / 2 kg/ 1 sec)
Bezophenone / ITX free UV varnish
Can be applied through Gravure coating cylinder or through Coating unit
Suitable for food packaging applications
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
Gravure – HSL SB
Solvent based Heat Seal Lacquer
Substrate – Aluminium foil to PVC film , Paper
Solvent system – Ethyl Acetate / MEK
Special features:
Provides Excellent heat seal property with 3-4 GSM of coating
Suitable for food and pharma applications
Heat seal temperature – 150-200 Deg C / 3 kg/ 1 sec
Toluene free lacquer
Can be applied through Gravure coating cylinder
Suitable for food packaging applications
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
Gravure – HSL WB
Solvent based Heat Seal Lacquer
Substrate – Aluminium foil to PVC film , Paper
Solvent System – DM Water / IPA = 95/5
pH Range – 8-10
Special features:
Provides Excellent heat seal property with 2-4 GSM of coating
Suitable for food and pharma applications
Heat seal temperature – 150-200 Deg C / 3 kg/ 1 sec
Can be applied through Gravure coating cylinder
Suitable for food packaging applications
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
Gravure – PAP Anticurl Coating
Solvent based Anti-curl coating for Paper application
Substrate – Coated / Un-coated Paper
Solvent system – Ethyl Acetate
Special features:
Provides good water resistance on paper
Special resin system provides Anti–Curl properties to paper
Good heat resistance properties (200 – 210 deg C / 2 kg/ 1 sec)
Bezophenone / ITX free UV varnish
Can be applied through Gravure coating cylinder or through Coating unit
Suitable for food packaging applications
TECHNICAL DATA SHEET
For further technical information, please contact Inkofix technical representative
at support@inkofix.com
